Welcome: Shandong Kosen New material Co., Ltd.
Polypropylene (PP) resins are thermoplastic polymers, meaning they may be formed with heat and re-melted without losing their intrinsic characteristics. Thermoplastics differ in this way from thermosets, which undergo permanent change after hardening. Thermoplastics are generally recyclable for this reason.
It is widely used in the production of woven bags, colored stripe cloth for sunlight shading or covering use,carpet backing (base fabric), container bags, tarpaulin and ropes. Products made from this resin are mainly used as packages for food, chemical fertilizer, cement,sugar, salt, industrial feedstock and ores.
Material | Grade | MFR | Application |
Yarn Grade | L5E89 | 2.5 | Extrudted sheet, Thermoforming, Drawing grade, Packing strap，Narrow band, Flat wire,Woven bag, |
T30S | 3 | ||
T03 | 3 | ||
S1003 | 3 | ||
1102K | 3 | ||
456J | 3.4 | ||
Homopolymer Injection Grade | M18 | 18 | Basic polymers used for blending modification, Toys, daily necessities, packaging，Houseware, Lids and covers of containers。
|
V30G | 15-17 | ||
M16 | 16 | ||
1100N | 12.8 | ||
HP500N | 12 | ||
3240NC | 12-13 | ||
M08 | 8 | ||
1205/1206 | 5/6 | ||
Fiber Grade | S2040 | 38 | Continuous filament, High speed spinning, Fine denier fiber, For production of face mask, Surgical gown, Baby Diapers, Non woven fabric. |
Y40 | 38 | ||
Y35X | 37 | ||
Y35 | 35 | ||
565S | 28 | ||
1101S | 25 | ||
Y25 | 25 | ||
Thin Walled Injection Molding | MN150 | 150 | Rapid injection molding, Disposable lunch box, thin-walled packaging vessel
|
MN90B | 100 | ||
MM90 | 90 | ||
648TM | 72.8 | ||
1870-B | 72.8 | ||
1040TE | 70.9 | ||
MN70 | 70 | ||
MM70 | 70 | ||
Low Melt Copolymer | K8003 | 3 | ICP injection grade, high impact resistance, Used for heavy bearing components, automobile component |
EPS30R | 3 | ||
2500H | 2 | ||
EP300K | 3 | ||
EP300H | 2 | ||
M02 | 2 | ||
K8303 | 3 |
LiveChatX
Send Email